T5 15W 4Pin quartz amalgam germicidal lamp for waste water treatment

4PIN germicidal lamp

The UVC lamp is made by quartz tube which can penetrate the ultraviolet wavelength 254nm,ultraviolet wave 185nm produces ozone which be dissolved in water to destroy the walls of the cells of microorganism ,and thereby kill them immediately.

Ultraviolet technology has been one of the most effective methods of water treatment and air purification.UV germicidal lamp isthe ideal solution for water disinfection application in a safe way,without using any chemicals.

1.Four-Pin, single ended UV germicidal lamps.

2.Made of high quality quartz.

3.Average lamp life is 10,000 hours.

4.Ozone-free lamps (254nm) and ozone-generating lamps (185nm) are for choice.

About UV Germicidal

Ultraviolet light has no ozone and ozone

Ultraviolet sterilization lamp is divided without ozone and ozone two kinds,No ozone UV germicidal lamp can only be disinfected to the place where the ultraviolet light is irradiated,Places blocked by the occlusion are not able to penetrate past sterilization;And the ultraviolet sterilization lamp with ozone is ultraviolet + ozone double sterilization, even if the place that is blocked,ozone can also disinfect sterilization ,not afraid of dead ends.

Product information

Each end of the tube is made of ceramic material,not easy to age, safe and insulated,easy to install and maintain.

The length of this series of lamps can be customized,single-head wiring,easy installation,especially suitable for water treatment.

Low pressure quartz amalgam germicidal lamp

A high-tech mercury-blocking coating is attached to the inner wall of the lamp tube, so that its UV intensity still maintains a high level at the end of its life.

The amalgam UV lamp has a wider range of adaptability to the ambient temperature, which means that in a more severe working environment, the amalgam lamp can still perform more stable performance.

Tube Diameter:T6=19mm

Tube Diameter:T8=25mm

Tube Diameter:T10=32mm

Application

1. Water treatment for sanitary wastewater or industry sewage pools etc.

2.Sterilizing and Algae remover for aquarium,farming ponds, landscape water area etc .

Matters need attention when using a UV lamp

The radiation of those UV lamps is harmful to eyes and skin.Protect your eyes and your skin against the ultraviolet rays.

1. Don't look at the UV lamp directly when the UV lamp is igniting.Hold a piece of ordinary glass before your eyes when you need to look at the UV-lamp.

2. Don't irradiate the skin under UV-lamp.

3. Please keep the surface of the tube clean to prevent the dust or the dirt from affecting the ultraviolet ray's output.

4. Please don't touch the quartz glass with bare hands while installing the lamp and using it.

5. The quartz glass can be cleaned by using alcohol tampon if there is dirty stains on the lamp .

FAQ

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A:Sample needs 5-7 days, about 30 days for mass production.

Q3. Do you have any MOQ limit?

A: Usually MOQ is 100pcs for each model.

Q4. How do you ship the goods?

A: We usually ship by DHL, UPS, FedEx or TNT for sample. Airline and sea shipping for large quantity

Q5. How to proceed an order?

A: Firstly let us know your requirements or application.

Secondly We quote according to your requirements

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly We arrange the production.

Q6: How to deal with the faulty?

A: Firstly, Our products are produced in strict quality control system

Secondly, during the guarantee period, we will send the replacement in next order.

After Sales Service

• Package tracking
• Technical support
• 24 hours working time
• Discount for reorder
• Replacements for quality problems
• Confidentiality of customer information

OEM Service

• We can advise the customer choosing the right heat lamp for the specific application. Furthermore, the Technical Department can design the right lamp based on the customer’s specific technical instructions.
• We can product many sizes and types heat lamp according to customers requirement, and so on.If have drawing is beat, then we can do samples for you.

Our Team

• Our company management team has nearly 30 years of experience in the optoelectronic industry, and has hired American infrared heating technology experts as technical consultants. With years of industry experience and market research, the company's R&D team can customize matching lamp types to suit your R&D innovation according to your needs, so as to cooperate with your development innovation and the upgrading of workshop processes, and keep up with the changing market trends.